Electric Air Compressor Pump High Pressure Auto Stop 30Mpa 4500PSI 220V 300Bar

  

Electric Air Compressor Pump High Pressure Auto Stop 30Mpa 4500PSI 220V 300Bar. Good tools are indispensable to complicated inflation operations.

Made of high-quality aluminum, and stainless steel, and adopting a paint-baking process, this electric high pressure air pump lays a foundation for your long-term use. 1800W power, 30 Mpa inflation pressure, and 2800 r/min speed can greatly improve your efficiency. Build to Last : Premium stainless steel, aluminum, and paint-baking process make the whole product solid. And durable, so it can better maintain beauty and practicability. High Efficiency: 1800W pure copper motor, efficient piston, high-quality cylinder, 30 Mpa maximum inflation pressure, 2800 r/min inflation speed, and high-pressure air hose with a diameter of 0.31 inch can help you complete the inflation work in a short time and improve your work efficiency. Elaborate Design: The pressure of this product can be adjusted within the range of 0-30mpa. In addition, when the pressure rises to the set pressure, the machine will automatically stop, freeing your hands. The built-in and external filters and filter cores in the package can timely filter out impurities, avoid clogging, and ensure smoother operation of your work. Simple and Convenient: Complete accessories, simple structure, detailed manual, and convenient switch enable you to complete the installation in a short time, observe the operation of the product in time and make corresponding adjustments. Valve, overheat, overload, overvoltage, and overcurrent protection functions, water cooling + air cooling mode, and an oil-water separator can effectively extend the service life of the machine and protect safety. Strong Stability: The horizontal design and a base with four. Pads can further maintain product stability. Easy to Carry and Store. The portable handle on the top and small size. (13.397.4813.78 inch). Let you easily store and carry it to any workplace.

Cleaning: The smooth surface allows you to easily remove dust and residues with a towel and water. Protective Packaging: The foam can better protect your product during transportation so that it can be delivered to you completely. Round Corners: Compared with traditional square corners, an arc design can better care for your skin. Long Power Cord and Hose : The 4.92ft power cord and 19.69inch hose reduce the limit of use and further protects your safety.

It can let you know more about the remaining amount and color of oil, thus making the oil change more timely. This silencer can reduce noise during operation, reducing the maximum noise of the product 70 dB.

Available capacity of 0-1.8gallon. This product is widely used in automobile tires, bicycle tires, steamboats, diving, gas cylinders, firefighting, air guns, etc. It is an ideal choice for leak detection, air tightness test.

Pipeline pressure tests, pressure tests, etc. Operation Method Of Electric Air Pump. Check the oil level before each use.

The oil level should exceed the red dot, but not too much. The oil is not included because of aviation safety policy, you need to add it yourself. (Very Important) Replace the oil cap used for transportation with a strip-shaped breathing plug.

To install a water pump, you need to put the pump into water. The more cold water, the better. After the pump circulates normally, you can turn on the electric air pump. Manually close the valve after reaching the required pressure, and the entire process requires attention. After startup, when the pressure rises to the set pressure, it will automatically stop.

Before starting the machine, loosen the vent screws on both sides. Remember, the machine needs to be started at zero pressure. If the vent screw is not loosened, the machine will not start. After the machine is stationary, tighten the vent screws on both sides to press normally. After inflation is complete, loosen the vent screw, deflate, and then remove the inflation connector.

Press the "Set" button to set the desired pressure. Press the "Open" button to start the machine. When the pressure rises to the set pressure, the machine will automatically stop. Name: Electric High Pressure Air Pump. Cooling System: Water Cooling/Air Cooling. Lubrication Mode: Oil Splash Type, Automobile or Motorcycle Engine Oil. Motor Power:1.8 KW. Power Cord Length: 1.5M/4.92ft. Available Capacity: 0-6.8L/0-1.8gallon. High-Pressure Hose Diameter: 8mm/0.31inch. High-Pressure Hose Length: 50cm/19.69inch.

Use Time: 6.8L/1.8gallon(45 Min); 0.5L/0.13gallon (5 Min); 0.45L/0.12gallon (4min); 0.35L/0.09gallon(3min and 40s). 13.47.513.8 inch.

Package Size: 422438cm/16.549.4514.96inch. 1 Electric High Pressure Air Pump. 1 Adjustable Water Pump With Sucker Regulator. Please install it in strict accordance with the instructions and pay attention to the safety precautions inside.

Before starting the machine, be sure to start the cooling water circulation first, otherwise, it may cause serious damage to the high-pressure piston ring of the machine and prevent it from being pressurized. For safety reasons, it is recommended that the pressure be around 25mpa. If you want to inflate a scuba tank, please replace the oil water separator with a breathing level filter. After completing the inflation, please loosen the open air valve first. When there is still air pressure in the compressor, do not start the vent valve.

Please do not touch the head section after the machine was just being used, so as to not be burnt by high temperature. Please pay attention to the level of oil and prepare enough cooling water. Please do not modify it arbitrarily, disassembling and repair by.

If abnormal noise occurred during the use of the product, please stop using it instantly and check the cause. The product should be placed in a place where it couldn't be touched by children. Please do not use it in a moist and flammable place.

Make sure the socket could withstand a current greater than 8-10A before using it, or the circuit might be burnt, the product might be damaged and the dangers may be caused due to overload of the socket. When it is used for inflating a slightly larger container, the cooling water should be changed every 30 minutes, in this way, the cylinder temperature could be lower. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.

Feedback is very important to us. It is impossible to address issues if we do not know about them! Please keep the original box or packaging within 15days since item received. Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday.