30Mpa/1800W Air Electric Compressor Pump PCP 4500PSI High Pressure Rifle 300BAR 1. Specification name:High-pressure air pump model:SG-GYCQB-002-110V voltage:220V power:1800W Working pressure:0 30MPA, 0-4500PSI cooling method:Water cooling + air cooling Inflation speed:0.13L / min (under 30MP pressure) Up to one charge:24L Compression method:Secondary compression Lubrication method:Oil splash Working noise:70db product weight:17KG Heavy packaging:18.5KG Product Size:34cm 37cm 18cm Features 1.
Full copper core motor with overload protection 2. The carbon pottery cylinder is integrally formed. Equipped with high-pressure explosion-proof valve, high-pressure check valve.
Equipped with external oil-water separator. Inflation speed of 0.13L / min under 30MP pressure. Air Compressor Pump PCP Electric High Pressure System Rifle 30MPa 220V UK plug. 30MPA High Pressure Air Compressor Airgun Rifle Paintball PCP Pump 4500PSI.Sed in car tire inflation, hovercraft inflation, air cushion toy inflation, balloon inflation, PCP airgun, rifle, paintball etc. Water cooling + air cooling. 0.13L / min (under 30MP pressure). Copper core motor, strong power, stable and reliable. Equipped with overload protection, the machine will overheat, and the overloaded machine will automatically stop to prevent the machine from being damaged. The cylinder body is integrally formed with carbon ceramic, which is sturdy and durable, and is matched with a ringless alloy piston. The cylinder has little wear and tear, good air tightness and long service life. The high-pressure check valve adopts all-copper check valve, which has high temperature resistance and good air tightness. With the explosion-proof valve, the pressure in the machine exceeds 30MPA and the pressure will be automatically relieved, which makes the use of the machine safer. Inflation speed of 0.13L / min (under 30MP pressure). It takes 8 minutes to fill 1L and 55 minutes to fill 6.8L. Digital display of working temperature makes it more convenient to use. Please and add lube oil into the compressor, and install(replace) tang breath plug before running the machine.
The machine is zero pressure start, before starting, please release the decompression screw. If there is pressure in your cylinder, do not open the valve until the pressure of the machine is equal to or greater than the pressure of the cylinder.
When the compressor working, the cooling system must be working at the same time. If you want the machine to work long times, please prepare two barrels of 30KG cooling water. When the temperature of the machine reaches 60 degrees Celsius, replace it immediately. If the machine vibrates violently, please add pad or towel under the compressor. Please remember to pay attention to the level of oil every time before start.The machine needs to be beside the machine when it is working, and the machine needs to be turned off when the inflation reaches the maximum pressure. 2PCS Pressure relief valve screw. 1PCS Fuel tank breathing filter.
This item is in the category "Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Air Compressors & Blowers\Other Air Compressors". The seller is "fasttobuy2021" and is located in this country: CN. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.