It also features the moisture filter which will be more safe. With the 8mm quick connector, you can also inflate your diving bottle less 1.5L.Car 12V DC or Home 220V AC Power Choice. This air compressor can be powered by the 12V car battery (Notenot the car cigarette light plug), aslo can be powered by the home AC outlet. With the extra 220V transformer (included).
This will make this air pumb more usefull as you can use it anywhere. Oil-Free & Water-Free & Built-In Fan Cooling for Long Life.Unlike traditional 220V electric high pressure air pump which needs the standard oil and cooling water when working in the market, the product does not need oil, clean and hygienic, no need for external water pump to cool, easy to operate. This will save you a lot of energy in future using. Note: New version does not include grease syringe any more. User manual is for old verison. 3 Type Safty Device Design & Convenient Wire Spool Design. Adjustable pressure gauge , safty valve and burst disc makes this air compressor pump more safe. With the wire spool, you don't need to worry about the wire winding and it also becomes beautiful.
This pcp compressor was designed mainly for inflating less than 1L tank. Fill a 190cc tank from 1800psi to 3300psi is a swift 2:30 minutes; Filled a 480cc carbon bottle from 1800psi to 3500psi is in a mere 8:30 minutes.The duty cycle of the machine is 30 minutes run / 20 minutes cool, or work for about 20 minutes and press the red button stop, the fan will continue to work, cooling 5 minutes, it can continue to work. This allows for filling of larger tanks (only suggest the max 1.5L) as long as the compressor is allowed to cool.
We will reply within 24hours and provide the best solutions for you. Processes of using the compressor.
First of all, you need to find the position of the car's battery, determine the positive and negative poles of the battery, and also make sure that the machine switch must be in the off state, and then release the bleed valve. You need to clip the red clip to the positive pole head or screw, and the blue (or black) clip to the negative pole head or screw, and then start the car. Then pull out the test plug and store it (the test plug is an important part for checking and analyzing machine failures).Connect the quick connector and check the fit between the quick connector and the male connector (most of the main reasons for the lack of air are the air leakage caused by the mismatch between the quick connectors, usually with soapy water or side leakage for testing). Toggle the switch to start the machine and check whether the two cooling fans are operating normally. After making sure everything is normal, tighten the vent valve and start refilling. In the process of pumping up, pay attention to the operator not to get too close to the inflatable container, please keep a certain safe distance. Closely observe the indicated pressure of the pressure gauge, the highest design pressure value of this machine is 300BARS. When the pressure reaches the required pressure value, please turn off the switch in time! Then open the bleed valve to drain the gas and water, and then disassemble the quick connector. Please pay attention to the pressure setting to suit the tire pressure of this model of car. After the inflation is completed, first open the vent valve to drain the water vapor, then disconnect the quick connector, connect the test plug, and remove the clamps on the positive and negative electrodes in sequence, wipe off the oil or water stains on the surface of the machine, and wait for the machine to cool down for a while Then wind the power cord on the winding plate of the machine.
Put the high-pressure inflation tube into the bag after the machine is put into the storage bag to make sure it is not knotted. If you want to use the machine at home, please use our optional conversion power supply. The side of the conversion power supply has a built-in toggle switch and a110V and 220V indicator.
The toggle switch should be based on the voltage of the place where it is used. If the location is 110V, please turn the switch to 110V.
If it is 220V, please turn the switch to 220V. If you make a mistake, the entire power converter will be damaged.
After confirming the voltage, clamp the power cord of the machine first, and make sure that the red is connected to the positive pole (+), and the blue or black is connected to the negative pole (-)! Plug in the power socket and start the machine according to the steps after the indicator light in the power converter lights up.Voltage: DC 12V for car battery, or AC 220V for home outlet. Test Inflating Result : 0.5L container, from 200BARS to 300BARS takes 4-5 minutes. Test Inflating diving tank result : 0.5L container, from 0BARS to 300BARS takes 16-17 minutes. Cooling System: Built-in fan cooling.
Shut Down: Auto-stop at Set-pressure. Output Nut: M101 , Quick connector: 8mm. Pump Size: L9.44 W6.29 H10.07 inch. Adapter Size: L 8.85inW4.52inH2.36in.
220V/230V to 12V Switching Mode Power Supply1. Note: New version does not include grease any more.
1, The duty cycle of the machine is 30 minutes run / 20 minutes cool. Or work for about 20 minutes and press the red button stop, the fan will continue to work, cooling 5 minutes. This allows for filling of larger tanks (Max 1.5L) as long as the unit is allowed to cool, although this is not the primary function of this small portable compressor. If your device can't be inflated or the speed is very slow, please check if the quick connector is normal.
3, Keep your children away from it when working. No APO/FPO addresses or PO Boxes allowed. Local pickups is not provided at this time.We are not responsible for undeliverable addresses. Please contact our customer service team immediately if.
You changed your mind and wish to request a return. Your product was damaged during transit.Please do not return or post items before obtaining instructions from us. This also applies to orders cancelled while in transit. Please make sure that item has NO man-made sabotage.
Used items will not be accepted for return. We will require a picture of the damaged part for verification. The item "30Mpa PCP Air Compressor Air Gun High Pressure Pump Auto-Stop with220V Transformer" is in sale since Monday, October 11, 2021. This item is in the category "Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Other Pumps". The seller is "motors24online" and is located in Cannock, Staffordshire.
This item can be shipped to United Kingdom.
Working Pressure: 300Bar/4500Psi/30Mpa