30MPA 4500PSI High Pressure Electric Air Pump Compressor Pump Adjustable pressure. It can set the pressure.When the pressure reaches a predetermined value. The machine will stop automatically. It has two high-pressure storage gas chambers, which can separate part of the oil and water to discharge sewage and reduce the temperature of the output air. 30MPA, 4500PSI, 220V high pressure electric air pump. When the compressor is working, the cooling system will work at the same time.
The machine must work with wear resistant hydraulic oil, so it is needed to pay attention to the level of oil. If the machine vibrates violently, please add pad or towel under the compressor.
When the machine arrives, please fill in the lubricant first. Then can the machine be started. Size: 36 18 37CM(L W H).
Air flow rate: 80 L/MIN. Working Pressure: 300BAR 30MPA 4500PSI.Connect 2 cold water pipes and connect them to the water pump. Note: the lower pipe connected to the water pump is water inlet; sinking pump is used in this product. The water pump should be immersed in water for using.
Install the hose at the air outlet. Note: gasket is needed, or air leakage might exist. Immerse the water pump in water and switch on the power. Connect the container need to be inflated.
Screw up the screws of the blow-down valve and pressure relief valve. Switch on the power ant the machine operates. Note: when the machine is operating, the water must operate correspondingly, or the product might be damaged due to overheated, personal harm may even occur. After the inflation is completed, screw of the pressure relief valve should be firstly loosen, then the power is to be switched off, by doing so, high pressure air backlash caused due to sudden failure of power supply would be avoided, which could lengthen lifetime of the product, as well as discharge high pressure air in the machine. The product should be placed at a place that it couldn't be touched by children.
Please do not use it in moist and flammable place. Please do not modify it arbitrarily, disassembling and repair by non-technical personnel is not allowed. Make sure the socket could withstand a current greater than 8A before using it, or the circuit might be burnt, the product might be damaged and the dangers may be caused due to overload of the socket. Please do not touch the head section after the machine was just being used, so as to not be burnt by high temperature.
Please do not leave without authorized, or the product might be damaged by increasingly rising pressure, sustained overload motor, even halt due to the operation pressure has reached but it is not turned off timely. When it is used for inflating slightly larger container, the cooling water should be changed every 30 minutes, in this way, the cylinder temperature could be better controlled. The machine oil should be checked regularly, make sure the oil level is above the upper edge of the red point. If color of machine oil becomes dark and black, it should be changed in time. 1PC × 30Mpa Electric Compressor Pump.2Pcs × Pressure Relief Screw. 2 Bags × Air filter cotton pad. It can set the pressure number. It has two high-pressure storage gas chambers, which can separate part of the oil and water to discharge sewage and reduce the temperature of the output gas. Specifications: Size: 36 18 37CM(L W H) Net Weight: 19.2KG Power: 220V, 50HZ Motor Power: 1.8KW Charge pressure: 30MPA (it will automatic shut down when the pressure reach 30MPA) Air flow rate: 80 L/MIN Pressure Capacity: 0-40 MPA Working Pressure: 300BAR 30MPA 4500PSI Cooling System: Water cooling Color: Blue.
The item "30MPA High Pressure Electric Air Pump Compressor Pump Adjustable pressure" is in sale since Wednesday, June 17, 2020. This item is in the category "Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Other Pumps". The seller is "matyebeb" and is located in DUNSTABLE.
This item can be shipped to United Kingdom.