220V 30MPa Air Compressor Pump PCP Electric High Pressure System Set Pressure

  

220V 30MPa Air Compressor Pump PCP Electric High Pressure System Set Pressure. 30MPa Elektrische Air Compressor PCP Pump can set pressure automatically DE.

Setting the pressure plate can set the pressure you want and When the pressure reaches the set point, it will stop. This item can save your time and work better. L Model: set pressure style compressor pump.

L Power supply: 220V 50Hz. L Working pressure:0-30Mpa/ 0-300BAR / 0-4500PSI. L The advantage of this product lies in its stable performance, the pressure can be set. L The product is equipped with high pressure rubber hose, to apply to multipurpose use.

L The product has you anticipated outstanding quality and convenience. L Superimposed double-cylinder two-stage compression used by this product has the feature of large displacement, quick air inflation, which could be not only used for diving fire cylinder, but also could be used in car, lorry, truck and other automobiles. L One machine serves several purpose, with a wide application range. A universal fast connection and charging connector is accompanied with the machine, in addition to inflation bottle, it could also be used for cars, motorbike, electric vehicles and other vehicles. Air tightness test, pressure vessel, withstand pressure experiment and other industrial fields. 1Take out the product; install the hose at the air outlet. Note: gasket is needed, or air leakage might exist. 2 Connect 2 cold water pipes and connect them to the water pump. Note: the lower pipe connected to the water pump is water inlet; sinking pump is used.

The water pump should be immersed in water for using. 3 Install the pressure relief valve screw; pressure relief valve screw is installed at the pressure relief hole under the hose. The blow-down valve is installed at the. Drain outlet of the first air chamber block.

4 Immerse the water pump in water and switch on the power. 5 Connect the container need to be inflated, make sure the connection is correct. 6 Screw up the screws of the blow-down valve and pressure relief valve. 7 Switch on the power ant the machine operates. Note: when the machine is operating, the water must operate correspondingly, or the product might be damaged due to overheated, personal harm may even occur.

8 After the inflation is completed, screw of the pressure relief valve should be firstly loosen, then the power is to be switched off, by doing so, high pressure air backlash caused due to sudden failure of power supply would be avoided, which could lengthen lifetime of the product, as well as discharge high pressure air in the machine. 1Please add illubricating oil before you start using the machine first. 46 wear resistant hydraulic oil.

Don't forget to put the lube oil into the compressor before running. 2When running, if the machine vibrates violently, please add pad or towel under the compressor. 3When the compressor working, the cooling system must be working at the same time. 4The machine must not be working without oil, so you must pay attention to the level of oil.

1 Please use the power supply according to the parameter table. 2 If abnormal noise occurred during the using of the product, please stop using it instantly and check the cause. 3 The product should be placed at a place that it couldn't be touched by children. 4 Please do not use it in moist and flammable place.

5 Please do not modify it arbitrarily, disassembling and repair by non-technical personnel is not allowed. 6 Make sure the socket could withstand a current greater than 8A before using it, or the circuit might be burnt, the product might be damaged and the dangers may be caused due to overload.

Feedback is very important to us. It is impossible to address issues if we do not know about them! Please keep the original box or packaging within 15days since item received. Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. The item "220V 30MPa Air Compressor Pump PCP Electric High Pressure System Set Pressure" is in sale since Monday, March 9, 2020. This item is in the category "Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Other Pumps".

The seller is "sell_the_item" and is located in Basel. This item can be shipped to all countries in Europe.

1. Brand: YONG HENG
2. MPN: Does Not Apply
3. Size: 360*180*370mm
4. Cooling mode: water cooling
5. Noise: 85db
6. Compress mode: two-stage compression
7. Lubricating system: splash type
8. Working pressure: 0-30Mpa
9. Rotating speed: 2800r/min
10. Power: 1.8KW
11. Plug: EU Plug
12. Application: Industrial