1.8KW Diving Breath High Pressure Air Compressor Vacuum Pump 2800r/min 30MPA

  

1.8KW Diving Breath High Pressure Air Compressor Vacuum Pump 2800r/min 30MPA. 220V Electric PCP Air Compressor Diving Pump 30MPA.

Motor speed: 2800r / min. Air output: 130L / min.

Motor material: all copper coil. Cylinder head material: cast aluminum. Connector type: 8mm quick connect female. Package size: 49 28.5 43cm. Oil: add piston type air compressor oil (the machine has no oil, because it is not allowed to carry oil by air). Speed test: it takes 3 minutes for 0.5L oxygen cylinder to inflate 30MPa, 6 minutes for 1L oxygen cylinder to inflate 30MPa, and 40 minutes for 6.8L oxygen cylinder to inflate 30MPa. Operation method of electric air pump.

Check the amount of oil before each use, the oil should exceed the red dot, but not too much. The Lubricating oil that is exported to foreign countries is taken out and needs to be added by itself. Change the oil cover used for transportation to a strip-shaped breathing plug. Loosen the air bleed screws on both sides before starting the machineRemember, the machine needs to start under zero pressure. If the bleeder screw is not loosened, the machine will not start.

After starting the machine, tighten the bleed screws on both sides to press normally After the end of the inflation, loosen the deflated screw and then deflate, then take the inflation joint. To install the water pump, you need to put the water pump into the water.

The more cold water, the better. After the water pump is normally circulated, the electric air pump can be turned on Manually shut down after reaching the required pressure, the whole process needs attention, and it is forbidden to leave. 1 x set of 30MPa high pressure air pump. 2 x pressure relief screws. 1 x tank breather plug.

Feedback is very important to us. It is impossible to address issues if we do not know about them! Please keep the original box or packaging within 15days since item received. Your satisfaction is our ultimate goal.

We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately.

If it's non-workdays, please kindly be patient and wait till Monday. This item is in the category "Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Other Pumps". The seller is "prtdealshop028" and is located in this country: CH. This item can be shipped to all countries in Europe.

1. feature 1: Creative design, durable material, beautiful appearance
2. feature 2: high quality，Stable property
3. Main Features: Stable feature, high reliability
4. Power Supply: 220V 50Hz
5. Power: 1.8KW
6. Rotating Speed: 2800r/min
7. Working Pressure: 30MPA 4500PSI
8. Noise: 70dB
9. Power Source: Electric
10. Application: Industrial
11. Air output: 130L / min
12. Cooling mode: water cooling
13. Compression level: secondary compression
14. Lubrication method: splash type
15. Cylinder head material: cast aluminum
16. Motor material: all copper coil
17. Shell material: Steel
18. Pressure range: 0-40MPa
19. Maximum temperature: 80 ℃
20. Total weight: 19.5kgs
21. Package size: 49 * 28.5 * 43cm
22. Herstellungsland und -region: China
23. Brand: Unbranded