The machine can be turned on by pressing the bottom on the top of the compressor. It is convenient to operate. The oil-water separator of this machine can greatly improve the efficiency of the air compressor. The oil-water separator separates oil and water within the compressed air, you can have a safer air compressing. The cooling mode of this compressor adopts both air cooling and water cooling, they are more efficient ways of cooling.
There are four shock absorbing feet on this air compressor. This air compressor is convenient to use with them.
This air compressor is equipped with a cooling fan, it reduces high temperature and improves the performance of this air compressor. The cooling fan also improves the life span of this air compressor. There is a handle on the top of this air compressor, you can carry it conveniently. The machine is not too heavy either17kg/.
, it can be carried by one person. The net cover of the cooling fan is made of stainless steel, it has a good heat dissipation effect and lasts long. The shell of this compressor is made of steel, which is sturdy and durable. It lasts long and the machine works better. This machine is suitable for fire protection, color bomb, leak detection, pressure test, automobile, airtightness test, etc.As long as high pressure can be applied, it can be used. Package Size: 49 x 28.5 x 43cm. Motor Speed: 2800r / Min. Model: Enhanced Version + External Oil-Water Separator. Cooling Mode: Water Cooling + Air Cooling. Motor Material: All Copper Coil.
Cylinder Head Material: Cast Aluminum. Connector Type: 8mm Quick Connect Female. This product comes with an English manual, you can refer to it and install the machine.If you have any problems, please reach to us, we will provide solutions as soon as we can. 1x Set of 30Mpa High-Pressure Air Pump. This high-pressure air pump uses piston type air compressor oil. (The machine has no oil because it is not allowed to carry oil during transportation). Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. The air compressor pump can be preset and. Which is more convenient and labor-saving. It is equipped with an external oil and water separator, which makes its work more efficient and thorough. It is suitable for the fast inflation of car tires, bicycle tires, and rubber boats, as well as for pipeline air pressure tests and airtightness tests.
Great Durability: The air compressor pump with an all-copper motor is more durable and can be used for a long period. Presetting Pressure : The air compressor pump can be preset and stop automatically when reaching the preset pressure value, which is more convenient and labor-saving. Efficient and Thorough: The pump is equipped with an external oil and water separator, which makes its work more efficient and thorough. Safe to Use: The pump with a high-pressure and explosion-proof valve automatically releases pressure when the pressure exceeds a specific value, which is safer for you to use.
Fast Filling Speed: You can finish the air filling with less time because of its better performance. It takes about 3 minutes for 0.5L/0.13gal cylinder to charge 30mpa, about 6 minutes for 1L/ 0.26gal cylinder to charge 30mpa, and about 40 minutes to charge 30mpa for 6.8L/1.8gal cylinder.Super Air-cooled Fan: The air compressor pump with the super air-cooled fan can dissipate heat in time to protect the machine and increase its work efficiency. Glow-in-the-dark: This pressure gauge has a night-vision function, which allows the pressure value to be seen even at night or in dark places. Accurate Measurement: The pointer does not jitter during inflation, so it can achieve more accurate measurements. Easy to Carry: You can easily carry it anywhere you like with the handle on the top of the machine. Overload Protection Switch: When the voltage is unstable or overloaded, it will activate automatically the protection function so that you don't have to worry about its security. Temperature Gauge: You can observe the temperature to check real-time conditions to make timely adjustments. Stainless Steel Mesh Cover: The stainless steel mesh cover makes the air compressor pump own good heat dissipation to ensure its smooth operation. Voltage: 220 V, 50 Hz. Outlet Volume: 130L/Min(34.34gal). Charging Equipment: 0-12L(0-3.17gal). Connector Type: Quick Connect Internal Thread (8mm/0.315inch). Product Size: 341935cm/13.397.4813.78inch. Package Size: 49 28.5 43cm/19.2911.2216.93inch. Gross Weight: 19.5kg/42.99lbs. Speed Test: It Takes About 3 Minutes for 0.5L/0.13gal Cylinder to Charge 30Mpa, About 6 Minutes for 1L/ 0.26gal Cylinder to Charge 30Mpa, and About 40 Minutes to Charge 30Mpa for 6.8L/1.8gal Cylinder. The product is easy to install and needs to be installed by yourself.
We will reply and solve the problem for you as soon as possible. 1 x Set of 30Mpa High-pressure Air Pump.
1 x Tank Breathing Plug. 2 x Pressure Relief Screws.Please read the attached operating manual completely before use. And pay particular attention to the safety instructions included. Please replace the breathing mouth before use, otherwise the front cover of the machine will explode. Please add piston-type air compressor oil before use (the machine has no oil because it is not allowed to carry oil during transportation). Feedback is very important to us. It is impossible to address issues if we do not know about them! Please keep the original box or packaging within 15days since item received. Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday.